bakelite powder
PF2C3—431

Colour:Black Moulding Method:Compression

1.Speciality and usage:
This product use Modified phenolic resin as adhesive,adding filler,and other additive, through heat refine to crank out granuler form phenolic moulding compound。It is suitable for common heat compression moulding method, it belong to general high-temperature resisting prevent burning product, Suitable for making insulating structures for low voltage electrical appliances and meters.

2.Technical data(see the attachment)

No.	performance	unit	index
1	vol. index		≤3.0
2	Relative Density		≤2.00
3	Impact Strength（with gap）	KJ/m2	≥2.0
4	Flexural Strength	Mpa	≥60
5	Hot distortion Temparature	℃	≥155
6	Insurance Resistance	Ω	≥108
7	Dielectric strength 90℃	ΜV/m	≥3.5
8	Water Absorbency	mg	≤40
9	Shrinkage	%	0.4—1.0
10	Buring nature（prevent buring UL94）	——	94V-0
11	Fluidity（reference item）	mm	80—160

3. Moulding condition for reference:

Pre-heating condition		Moulding Condition
Temperature ℃	Time min	Mould Temperature℃	Pressure MPa	Product Thickness1 mm Keeping time min
105±3	15	160±3	≥30—40	1—1.5

Notes：
1) Fluidity（Raschig）and Shrinkage are determined by supplier and user, Above
     index are only for reference.
2) May not be pre-heated before moulding, But should be degased one or twice.
3) The moulding condition can be adjusted according to actual size, thickness, usage
     of products and different moulding equipment. In principle, the quality of finished
     products can not be decreased.
4) Above Moulding reference condition are only instruction and suggestion. Because
     the quality of our products are keeping improving, The techincal data are
     changing, Sorry for no advice again.

4. Packing and storage:
    25kg net weight in one PP woven bag, inner lined with PE film, Package printed with
    our brand”JIAMIN”and product type, Lot number, Weight and manufacturer.

Storage should Avoid moisture, heat, Stored in dry and cool room with ventilation, Could not be nearby fire or exposed to sunlight. Storage period: 12 months from the date when the product is manufactured. It exceed limit, test should be undertaken. It can be used if test shows good.

bakelite powder PF2C3—431

bakelite powder
PF2C3—431